Kolibri KM-260D (V-Hull)

“KOLIBRI” inflatable keel motor boat KM-260D is the classic shape of the hull, wide cockpit , sliding seats and large capacity provide a comfortable stay for two people with luggage for a long time, even with the small size of the boat.

KOLIBRI inflatable PVC motorboat KM-260D is a classic keelboat (dinghy) in hull form, with a wide cockpit, sliding seats and large capacity. This compact two-seater rubber boat ensure a comfortable stay on the water for a long time for two people with luggage, even with the dimensions of such a small dinghy.

This “KOLIBRI” KM-260D PVC keelboat – motorboat “ dinghy boat” is made of high quality 5-layer PVC with all seams welded by HFW equipment. This is a safe boat.

Read More

Pickup Availability:

Malta
(Out of Stock)
  • FOLDING FLOORING (SOLE-BOOK)
0.00

General Info

1-4 sequence of inflating the chambers of the boat
Three airtight compartments in chambers and an inflatable keel
Nominal pressure in chambers 0,25 bar
Nominal pressure in keel 0,35 bar
 

 

Features

Kolibri KM-260D includes:

  • PVC boat – 1 pc
  • Foot pump – 1 pc
  • Oars – 2 pcs
  • Bench (marine plywood) – 2 pcs
  • Boat carrying bag – 1 pc
  • Repair kit (glue, PVC patches) – 1 pc
  • Boat owner’s manual with warranty

If speed and handling, performance and seaworthiness are important to you, as well as the possibility of installing a powerful engine and long trips – choose the Standard (D) – series inflatable keelboat, motor boat, PVC boat (rubber boat)! If you want a boat with a powerful engine and high capacity and carrying capacity, you need the Kolibri KM-260D Kolibri inflatable keel Profi series motorboat!

Specifications

Length overall, cm260
Length internal, cm165
Width overall, cm144
Width internal, cm64
Balloon fabric950 g/m² PVC
Tube diameter, cm38
No of chambers, pcs3+1
Loading capacity, kg270
Passengers capacity2
Engine max, HP (kW)5 (3,7)
Set weight, kg42
Dimension of package, cm100х53х33
Boat design category (CE)D

Additional Info

Kolibri KM-260D advantages:

  • Durable and cut-resistant five-layer PVC fabric with a density of 950 g/m2;
  • Floor board (folding floors (foot book));
  • Two versions of floorboards: aluminum or plywood;
  • The entire width of the interface is reinforced with an aluminum profile;
  • Additional strengthening of floorboards;
  • The main assembly units are welded using HFC (HFW) equipment;
  • Wedge lines reinforced with 6 cm protective strip;
  • The transom is made of film-covered plywood;
  • Overpressure valves to relieve excess pressure in pipes;
  • Sliding seats – install it in the most comfortable position;
  • Rowing equipment with improved hydrodynamic properties;
  • Bow roll with anchor rope attachment;
  • Monolithic transom mounts