The Watersnake 80lb Geo-Spot Bow Mount Motors are the next step in GPS motors with features such as Anchor Mode, Pilot Mode, Navigation Mode and Jog mode.
Anchor Mode is every anglers favourite function. Hold your position with the press of a button and let the motor do the work while you do the catching.
With Pilot mode and Cruise mode, keep your heading and ground speed regardless of wind or current.
If you want to target certain areas regularly, say a winding shoreline, then Tracking and Navigate Modes are for you.
After recording a track (up to 5km long) you can autonomously retrace that track again whenever you want, focusing on the fishing, not the motor. Geo-Spot can store up to 16 tracks at a time.
All of this is controlled with the handheld remote control, so you have control from anywhere on your boat. Geo-Spot is also compatible with an optional foot controller sold separately.
Specifications
MODEL
Watersnake Geo-Spot 80lb
CODE
55321
THRUST
80lb
VOLTS
24v
AMP DRAW
0-40A
WATTS (MAX)
960W Input / 620W Output
SPEEDS
Variable
MAX PROP RPM
1900rpm
MOTOR WEIGHT
30KG
SHAFT
78″ (198cm)
SHAFT DIAMETER
1.2 Inches (30mm)
SHAFT WALL THICKNESS
5mm
STEERING
GPS, Remote Control Fob
PROP
Fibre-Reinforced Nylon 3-Blade (94mm Pitch)
REMOTE CONTROL
Digital Fob
MOUNTING
Bow Mount Bracket
WIRE GAUGE
10AWG
BATTERY REQUIRED
24V Deep Cycle Battery or LiFePO4
SUGGESTED MIN. BATTERY SIZE
100 Amp Hour
SUGGESTED MAX. BOAT WEIGHT
Up To 1200kg
Additional Info
GPS Nav Sensor Included
The Watersnake GPS Nav Sensor helps you get the most out of your Geo-Spot electric trolling motor. The Nav Sensor provides additional magnetometer, accelerometer and gyroscope functionality to the motor’s GPS controller, improving all aspects of the motor’s operating system including a more accurate and stable Anchor Mode. As well as improving the overall functionality, the Navigation Sensor provides a Jog feature not available on the 65lb Geo-Spot motor.
The Jog feature enables you to easily move your boat forward, back, left and right in 1m increments while staying in Anchor Mode. This allows you to alter your Anchor position slightly and regularly without having to disengage and re-engage the Anchor Mode each time.