Honda Marine Outboard | 15HP | Short Shaft | Tiller | Electric Start

With a compact size just slightly larger than the BF9.9–but with more power–the Honda Marine Outboard 15HP Motor is perfect for aluminium fishing boats, inflatables, sailboats or as a kicker for a larger fishing boat. It has one of the largest displacements in its class, giving you big performance, and the added reliability of 4-Front Corrosion Protection and Engine Alert System.

If you’ve got an inflatable boat, a RIB or a tender, these engines are not only easy to transport, they’re easy to operate too.

Both engines (BF15 & BF20) have an automatic decompression system for easy starting. This makes the engine much easier to turn over for that initial pull if you have a manual recoil-type, and it’s less of a drain on your battery if you have the electric start.

In forward motion (A) the propeller will drive normally through water, but in reverse it's a different story – unless you have a Honda. On other outboards, the propeller will turn in exhaust bubbles and wont ‘hook up’ with the water. Our unique reverse exhaust relief system directs the exhaust bubbles away from the propeller (B), so that it can 'grip' the water – instead of air. The result is instant reverse response with much finer control.

The Honda Marine Outboard 15HP light engine is easy to tilt up in five stages. Both the manual (A) and power versions (B) will lift up or down, enabling you to trim the boat to give you maximum performance and fuel efficiency. It also stops you from damaging the propeller blades when you find yourself near rocks or the water’s edge. 

Both engines have a Forward Mount Shift Lever for fingertip gear changing. It's so much easier to operate and better located than on other outboards, whether you're left or right-handed. Together with a soft-grip throttle handle and a twist-lock, it’s effortless. You can just roll on and off the power all day long (B), or lock it off (A) – just like cruise control.

They’re so quiet you can raise the power, without having to raise your voice.

Whether it’s for commercial or leisure use, when the 4-stroke spins into life you’ll notice how quiet it is as you roll on the power. And with the exclusive Honda rubber mount device that soaks up the vibrations, it feels smooth too. These high-output outboards will push you and your passengers nicely through the water when you're out for a day’s work, or cruising and fishing.

You’ll be glad to know these light 4-stroke 350cc engines are easy to start, that's because they have a decompression system and a Programmed ignition (PGM IG). This ignition system accurately delivers the right amount of fuel/air mixture to the twin cylinders, so when you fire up these Hondas – even from cold – they're ready for fun, right from the word go.

These compact engines are not only smooth operators, they're robust and perfect for commercial use too. They have a high-output charging coil, which will support most electronic equipment you have on board – even at lower revs and slower speeds.

The finish is stunning in Honda aqua marine silver. And with a folding handle on the exact point of balance, even carrying it around the outboard looks fantastic.

Ritz Marine is an official Honda Marine reseller in Malta.

Read More

Pickup Availability:

Malta
(Only 1 unit left in stock!)

1 in stock

0.00

Features

Performance and Efficiency

Honda Four-Stroke Engine Design

  • The BF15s utilize a 350 cc, 2-cylinder, in-line, OHC design powerhead. World-renowned Honda quality combines proven reliability and quiet operation with no gas-oil mixing.

Pendulum-Motion Vibration Dampening

  • An exclusive Honda feature, the pendulum-motion mounting system for the powerhead helps absorb the vibration, including longitudinal vibration, which was difficult to reduce successfully by conventional rubber mounts. The pendulum mount does this without the use of a heavy balancer shaft, which also significantly reduces overall weight.

Increased Reverse Thrust

  • When reversing, the exhaust gases are diverted through additional exhaust relief ports above the cavitation plate, allowing the propeller to back up into clean, bubble-free water, thereby increasing reverse thrust.

 

Reliability and Durability

PGM-IG Ignition

  • PGM-IG ignition provides reliable starts and optimum ignition timing, enhancing running performance across the entire speed range.

Complete Engine-Management System

  • Electronically controlled monitoring system protects the engine components from over-revving, low engine-oil pressure and overheating.

Regulated Charging System

  • A high-quality regulator/rectifier is standard on all models to prevent overcharging the battery.

Fresh Water Flushport

  • Allows easy hook-up to fresh water supply to flush debris and salt water out of the engine, extending the life of the outboard (optional Flush Kit required).

Ultra Low 3 Star CARB Emissions

  • Environmentally conscious technology. All Honda Marine engines exceed the highest CARB 3-Star rating to meet the rigorous California Air Resource Board’s standards.

 

Convenience and Ease of Use

Auto-Choke System

  • An automatically controlled start-up fuel-enrichment system ensures optimum air-fuel ratio to the engine, eliminating the chores of choke operation and greatly simplifying engine start-up (Electric-start models).

Lightweight, Rounded Design

  • Easy to transport, ideal for 12-16 ft. fishing boats), inflatables and pontoon boats especially, with remote-control power-tilt models available. Rounded ergonomics won’t catch fishing lines as easily.

High-Output Charging System

  • All electric-start models are fitted with a high-output charging system that will deliver an amazing 12 amps at only 3,000 rpm to keep your electronics working and batteries charged.

Easy-Pull Starting

  • The programmed-ignition system sets the ignition system during start-up to reduce the effort required to pull start the engine.

Forward-Mounted Shift Lever

  • Allows more control and comfort in shifting.

Quick-Twist Throttle Friction Adjuster

  • A simple twist of the throttle friction collar located right at the throttle grip allows you to adjust the throttle tension up or down, minimizing driver fatigue.

Front-Mounted Steering-Friction Adjuster

  • A new quick-adjust lever design located just above the transom bracket allows for precise adjustments at your fingertips.

Integrated Carrying Handle

  • A convenient, foldaway carry handle is situated at the exact horizontal balance point of the engine so that the engine carries more easily in a level position.

Long Tiller Handle

  • The BF15 tiller models use a long tiller handle for increased control and reduced steering effort. The tiller handle is also made of lightweight composite for increased strength and weight reduction.

Standard Fuel Tank, Hose and Propeller

  • A 12-litre fuel tank, fuel hose and aluminum propeller are included as standard equipment.

Specifications

Engine

Type 4-Stroke SOHC; 2 Cylinders / 4 Valves

Displacement 350 cc / 21.4 cubic in.

Bore & Stroke 59 mm x 64 mm (2.32 x 2.52 in.)

Full Throttle RPM Range 4,500-5,500 RPM

Propshaft Rated Horsepower (HP) 15 hp @ 5,000 RPM

Cooling System Water Cooled

Fuel Delivery 1 Carburetor

Recommended Fuel Unleaded Gas. (Min. Pump Octane 86)

Ignition System PGM-IG

Starting System Electric

Exhaust Under Water, above propeller

Lubrication Forced Lubrication (Trochoid pump)

Recommended Oil SAE 10W30 API service classification SJ or later

Oil Capacity 1.30 L (1.14 Imp. qt) with oil filter repl.

Trim Range 4-Stage 8°-12°-16°-20°

Tilt Range 71° (S-type); 72° (L-Type)

Steering Angle N/A

 

Drive

Gear Ratio 2.08:1

Gear Shift F-N-R

 

Equipment

Alternator (Electric Start) 12 amp / 152 watts

Oil Pressure Alert Standard

Over Rev-Limiter Standard

Temperature Alert Standard

 

Dimensions

Overall Width 350 mm / 13.7 in.

Transom Height (S-Type) 432 mm / 17 in.

Transom Height (L-Type) 563 mm / 22.2 in.

 

Propeller

Propeller Type 4-Blade (Aluminum)

Propeller Diameter x Pitch (S-Type) 235 mm x 254 mm / 9-1/4 x 10 in.

Propeller Diameter x Pitch (L-Type) 235 mm x 254 mm / 9-1/4 x 10 in.

Propeller Diameter x Pitch (BF(P) Models) N/A

 

Dry Weight

S-Type 46.5 kg / 103 lbs.

SHS-Type 50.0 kg / 110 lbs.

L-Type 49.5 kg / 109 lbs.