ZAR mini Lux 14
Our beautiful ZAR mini™ LUX line has different sizes and versions to offer. All boats are equipped with a bow locker, engine well and a flat double flooring. The design of the hull and cockpit is selfdraining. All boats offer as standard equipment a Teak design EVA floor, bow cushion, bow backrest, bow step plate, keelguard, bimini holder, backrest, luxury steering console and a reinforced hull.
As optional equipment you can choose from a variety of sunroofs, bilge pumps, bathing steps and many more things.
The ZAR mini™ LUX line can easily pull water toys, waterski (from30hp) and tubes with the two installed D-rings on the transom, but you can also install a towing mast behind the backrest, so you can also do wakeboarding.
Every ZAR mini™ has four Davit lifting points. Two in the bow and two on the transom.
Due to the very light aluminum hull it can go very fast and plane easily with a smaller engine. The hull will not face any problems of Osmosis or gel coat defects like a fiberglass hull. It will also last longer and not become heavier during use. The aluminum hull is being specially manufactured and powder coated to resist corrosion and saltwater. You will have a lot of fun with your ZAR mini™ RIB.
Pickup Availability:
Features
All RIB inflatables from ZAR mini™ until RIB14 have a 5 layer reinforced high quality 1.100 dtex PVC material with a weight of 1.050g/m2 and a thickness of 0.9mm.
All RIB inflatables from ZAR mini™ starting from RIB15 have a 5 layer reinforced high quality 1.100 dtex PVC material with a weight of 1.500g/m2 and a thickness of 1.2mm.
All ZAR mini RIB inflatables are also available in CSM (formally known as Hypalon™ from DuPont™) with a special design. Please ask your ZAR mini™ dealer, for further details. CSM lasts much longer than PVC and is more resistant toward UV light, acid, alkalis, saltwater, heat and cold. We use Hypatex™ that is one on the best material on the world market today. It has been manufactured since 60 years.
All PVC seems of our ZAR mini™ tube chambers are welded. All boats feature an overpressure valve, as standard equipment, that will protect your tube when inflated properly. High quality material’s paired with constant research & development are the key to success.
Every single ZAR mini™ inflatable boat passes a very strict quality control, before we deliver it to our valued customers. Just in case a mistake passes the quality control, you will be protected by our limited 2 years warranty after registering your boat with us.
With our large standard equipment and our modern Italian Design, the ZAR mini™ inflatables are one of a kind.
For all kind of watersport you can find your matching ZAR mini™ RIB. Waterskiing, cruising, SCUBA diving, fishing or as a tender to your yacht. ZAR mini™ LUX is able to satisfy your expectations.
Specifications
Length | 420cm |
Internal Length | 316cm |
Width | 210cm |
Internal Width | 105cm |
Tube Diameter | 51cm |
Boat Weight | 235kg |
Boat Capacity | 850kg |
Persons Capacity | 8 person |
Inflation Points | 4 pieces |
Recommended Engine Power | 40HP |
Max Engine Power | 60HP |
Engine Weight | 110kg |
Boat Material | PVC/Hypalon |
Engine Shaft | Short |
Hull Type | Aluminium Rib Hull |
Built In Fuel Tank | 54L |
Additional Info
This is the Luxury 14-foot model by the renowned brand ZAR, part of the prestigious ZAR Formenti group.
The retail price of this boat is 25k. You will find it even more expensive online. However, as an introductory offer in Malta, we are reducing the price to cost price for the first 6 months.
REDUCED Limited Time Price is of €19,900, including VAT.
LUX 14 features
- Bow Locker
- Engine Well
- Flat double flooring
- Self-draining Hull
- Teak Design EVA floor
- Bow Cushion/Backrest/Step plate
Yamaha Engine + Installation incl, in Price, covers
- Yamaha 50HP
- Steering Cable 15ft
- Throttle Cable 16ft
- Battery Box + 65AMP Battery
- 5ft wire 16mm
- Wiring + 2 SwitchesSteering Box + Wheel
- Installation