ZAR mini Rib 16 Heavy Duty
HEAVY DUTY – RIB’S MADE SPECIALLY FOR THE ROUGHEST AND TOUGHEST CONDITIONS AT SEA
Pickup Availability:
Out of stock
Notify when available
Enter your email address below and we'll notify you when this product is back in stock!
Features
| Deep-V bottom | • |
| Reinforced integral transom for outboard engine | • |
| Splash guard on transom | • |
| Self drainage plug | • |
| Multi-chamber buoyancy tube | • |
| Tough raised rubbing strake with splash guard | • |
| Adjustable & removable ALU seat(s) | O |
| Anchor bow nose with cleat | • |
| 2 Bow lifting handle | • |
| 2 Rear lifting handles | • |
| Holding handles on tube | • |
| Safety valve | • |
| Anti slip pattern inside | • |
| Bi color tube with deco | • |
| Keel guard | • |
| 2 oarlocks with 2 oars and oar posts | – |
| High efficiency foot pump | • |
| Extra wide double flooring flat inside | • |
| Bow locker with anchor locker and fuel tank place 24l | • |
| Standard console C1 | • |
| Seat S3 | • |
| Bow locker and fuel tank place 12L | – |
| Rollbar | • (4mm thick Alu and powdercoated colour free of choice) |
| Steering console | O |
| Foldable steering console | – |
| Double seat with backrest | O |
| 2 holders for fuel hose on tube | – |
| CSM tube material from Hypatex (Hypalon) | O |
| Underseat bag with soft cushion for seat | O |
| Welded PVC tube material | • |
| Extra Powdercoated aluminium hull – 200°C | • |
Specifications
| Length | 500cm |
| Internal Length | 399cm |
| Width | 224cm |
| Internal Width | 118cm |
| Tube Diameter | 52cm |
| Boat Weight | 297kg |
| Boat Capacity | 1000kg |
| Persons Capacity | 10 person |
| Inflation Points | 6 pieces |
| Recommended Engine Power | 60HP |
| Max Engine Power | 100HP |
| Engine Weight | 170kg |
| Boat Material | CSM(Hypalon**) |
| Engine Shaft | Long |
| Hull Type | Aluminium Rib Hull |
Additional Info
All RIB inflatables from ZAR mini™ starting from RIB15 have a 5 layer reinforced high quality 1.100 dtex PVC material with a weight of 1.500g/m2 and a thickness of 1.2mm.
All ZAR miniTM RIB inflatables are also available in CSM (formally known as Hypalon™ from DuPont™) with a special design. Please ask your ZAR mini™ dealer, for further details. CSM lasts much longer than PVC and is more resistant toward UV light, acid, alkalis, saltwater, heat and cold. We use Hypatex™ that is one on the best material on the world market today. It has been manufactured since 60 years.
All PVC seems of our ZAR mini™ tube chambers are welded. All boats feature an overpressure valve, as standard equipment, that will protect your tube when inflated properly. High quality material’s paired with constant research & development are the key to success.
Every single ZAR mini™ inflatable boat passes a very strict quality control, before we deliver it to our valued customers. Just in case a mistake passes the quality control, you will be protected by our limited 2 years warranty after registering your boat with us.
With our large standard equipment and our modern Italian Design, the ZAR mini™ inflatables are one of a kind. Starting from RIB13 you will have an extra wide bow.
For all kind of watersport you can find your matching ZAR mini™ RIB. Waterskiing, cruising, SCUBA diving, fishing or as a tender to your yacht. ZAR mini™ RIB is able to satisfy your expectations.
The ZAR mini™ RIB line can easily pull water toys, waterski (from25hp) and tubes with the two installed D-rings on the transom.
Every ZAR mini™ has three lifting Davit lifting points. One in the bow and two on the transom. If your ZAR mini™ has a bow locker, you will have four lifting points.
Related Products
€38 +Add
